Published: CABEQ 30 (2) (2016) 199-211
       Paper type: Original Scientific Paper 
     
H. Soltani, S. Shafiei and J. Edraki
Abstract
      This research is an attempt to develop a new procedure for the synthesis of reactor
networks (RNs) using a genetic algorithm (GA) coupled with the quasi-linear programming (LP) method. The GA is used to produce structural configuration, whereas continuous variables are handled using a quasi-LP formulation for finding the best objective function. Quasi-LP consists of LP together with a search loop to find the best reactor conversions (xi), as well as split and recycle ratios (yi). Quasi-LP replaces the nonlinear programming (NLP) problem, and is easier to solve. To prevent complexity and ensure an optimum solution, two types of ideal reactors, namely plug flow reactor (PFR) and continuous stirred tank reactor (CSTR), were considered in the network. Since PFRs require the introduction of differential equations into the problem formulation, a CSTR cascade was used instead in order to eliminate differential equations. To demonstrate the effectiveness of the proposed method, three reactor-network synthesis case studies are presented.
    

This work is licensed under a Creative Commons Attribution 4.0 International License
    
Keywords
      reactor network synthesis, genetic algorithm, quasi-linear programming method, plug flow reactor, continuous stirred tank reactor